Printing A Test Label - Intermec EasyCoder 3400e User Manual

C d

Printing a Test Label

EasyCoder 3400e Bar Code Label Printer User's Manual
39
Helvetica Condensed Helvetica
If you would like to test your communications by downloading a label,
follow the example below. Use the PrintSet application software to send a
test label to the printer. This example assumes that your printer is
communicating with a PC and that the printer is correctly loaded with
media.
To print the test label
1 Start PrintSet on your PC.
2 From the Options menu, choose Test Print.
3 Select the Test Label option button.
4 Select either the Text or the Bar Code option button.
If you select to print text, you can choose any font in the Select Printer
Font list box.
If you select to print a bar code, you can choose any symbology in the
Select Symbology list box.
5 Choose Print. Your attached printer prints a test label.
For example, if you chose to print a bar code with the Code 39
symbology, your printer prints a label similar to this one:
*0123456789*
*0123456789*
Chapter 2 — Operating the Printer
3XXXU.030
29