Options In Ubi Shell - UBI EasyCoder 101 Startup Manual

Intermec easycoder 101: user guide
Hide thumbs Also See for EasyCoder 101:
Table of Contents

Advertisement

UBI Shell 4.0 Standard – Startup Manual
USING UBI SHELL, cont'd.

Options in UBI Shell

1
/. A prerequisite is that the program is
provided with the extension ".PRG".
However, some original UBI utility
programs are excluded from the list:
ERRHAND.PRG
ERRH910.PRG
FILELIST.PRG
MKAUTO.PRG
TEST910.PRG
In UBI Shell, the options are presented in stacks of menus, organ-
ized as infinite loops, where you can move around and select the
desired option, as illustrated by the diagram at the end of this
chapter.
Select Application
The Select application option allows you to enter a stack of menus
showing the different application programs in the printer's memory
Note that after having selected an application, you must wait for
the printer to restart and perform the 5 seconds countdown before
the selected application is opened.
As standard, EasyCoder printers fitted with UBI Shell will contain
the following application programs:
UBI LabelShop selects the standard serial interface "uart1:" as
standard
channel and sets up the printer for the UBI
IN/OUT
LabelShop label design program, which you can run on a
personal computer with Microsoft Windows 3.1.
Refer to the UBI LabelShop User's Manual.
UBI Windows Driver selects the optional parallel interface
"centronics:" as standard
for the UBI Windows Driver, which you can use on a personal
computer to produce printouts from almost any standard pro-
gram run under Microsoft Windows 3.1, e.g. word processors,
spreadsheet programs, drawing programs etc.
Refer to the UBI Windows Driver Installation Instructions.
UBI Macintosh Driver makes it possible to connect an Apple
Macintosh computer to any RS 232C communication port on
the printer. The program automatically detects which port is
used and resets its communication parameters. In case of
"uart1:", the baudrate is set to 19,200 and in case of "uart2:" or
"uart3:" to 38,400. The UBI Macintosh Driver is installed in the
System folder of the Macintosh computer and can be selected by
means of the Chooser. Then you can print from almost any
standard program, e.g. word processors, spreadsheets, drawing
programs, etc.
Refer to the UBI Macintosh Driver Installation Instructions.
channel and sets up the printer
IN/OUT
1
.
Continued!
6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EasyCoder 101 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Easycoder 201iiEasycoder 401Shell 4.0 standard

Table of Contents