Exiting Terminal Setup - UBI EasyCoder 101 Startup Manual

UBI Shell 4.0 Standard – Startup Manual
TERMINAL SETUP, cont'd.

Exiting Terminal Setup

To exit the Terminal Setup program, e.g. after having changed the
setup, you must select the Reboot option after having stepped
through all the facility options, as illustrated below:
----------------
UBI SHELL
PRINT SETUP
----------------
(Y / N):N
----------------
UBI SHELL
TESTFEED
----------------
(Y / N):N
----------------
UBI SHELL
TEST LABEL
----------------
(Y / N):N
----------------
UBI SHELL
SER-COM RESET
----------------
(Y / N):N
----------------
UBI SHELL
CLEAR RAM MEMORY
----------------
(Y / N):N
----------------
UBI SHELL
REBOOT
----------------
(Y / N):Y
If you answer N (=No) here, you will return to the "Select
Application" option, but if you answer Y (=Yes) the printer will
start up again and begin the UBI Shell countdown. Then you can
enter Terminal Setup once more by transmitting a triple T, enter the
UBI Shell manually by pressing the < Print > key with the print-
head down, or return to the last selected application by waiting for
the countdown to be completed without taking any action.
19