Page 1
FE 501S 265000S320 (SS/AL) RS -12 Full-System Exhaust Enduro Series systems are: • Equipped with USFS-approved spark arrestor. • CARB/EPA tail-pipe emissions compliant. • All applications are marked with appropriate EPA noise labels. • Have not been tested for EPA new vehicle noise compliance.
CAUTION: Exhaust system can be extremely hot. 2. Install (No. 3) Z1024, square rubber grommet Let motorcycle cool down before into header chassis mount bracket. beginning installation. Always wear hand and eye protection and take precautionary measures to avoid injury. WARNING: Always properly support vehicle with a stand and/or lift when servicing or performing any work.
If problem still persists, please call Top View Yoshimura Tech Department at (800) 634-9166 / in CA (909) 628-4722. 11. It is recommended that the muffler and tailpipe be wiped down with rubbing alcohol to remove oil and fingerprints.
Page 5
Husqvarna Heatshield Template Foil Side Up Be sure not to scale or resize when printing template. Verify template is 1:1 using the scale below. 1” Scale...
Dear Yoshimura Customer, Congratulations and thank you for purchasing a Yoshimura Exhaust System. Over six decades of experience in research and development, state of the art machinery, materials and craftsmanship of the highest quality all come together in a product of exceptional quality and performance—in other words, this is the best thing you can put on your bike.
Page 7
When you are performing periodic maintenance on your vehicle (like a tire change, or an oil change) you can remove your Yoshimura muffler from the vehicle and weigh it again.
Page 8
(found on header and tail-pipe components). 6. Also, feel free to ask through online e-mail at sales@yoshimura-rd.com, or fax your question/problems to (909) 591- 2198. To obtain technical information directly from Yoshimura, call (909) 628-4722.