700 Series Mobile Computer; 700 Series Software Input Panels - Intermec CK30 Programmer's Manual

700 Series Mobile Computer

700 Series Software Input Panels

™
TE 2000 5250 Terminal Emulation Programmer's Guide
For help with using the 700 Series Computer, refer to the 700 Series
Monochrome Mobile Computer User's Manual (P/N 961-054-032) or the
700 Series Color Mobile Computer User's Manual (P/N: 961-054-031).
With the Software Input Panels (SIPs), you can change the color of up to
ten keys, given four color choices (including the original gray. To change
the color of the keys (only up to 10 keys):
1 Hold the LEFT Shift key down until it reverses back to normal.
2 Hold the RIGHT Shift key down until it reverses back to normal.
3 Select the letter that represents the color to which to switch.
4 Select from the three colors listed in the dialog box, or select the option
to return all of the affected keys back to gray.
Main Keyboard
Function Keyboard
Lowercase keys with shifted characters
The illustration above shows the Software Input Panels (SIPs) for the VT/ANSI application.
G
S
Tap the Mn key off the Shifted keyboard to get to the TE 2000 Setup Menus.
S
S
Tap the Shift key to toggle between the Main and Shifted keyboards.
}
S
Tap the toggle key to toggle between the Function and Main keyboards.
Tap the Cap _ key to use uppercase keys with numbers.
S
S Tap the Cap _ key, then the Shift
—
Chapter 3 Using the Terminal's Keyboard
Shifted Keyboard
Uppercase keys with numbers
S
key to use lowercase keys with shifted characters.
63