Table of Contents
Advertisement
• If the cable is damaged or to be replaced, the operation must be carried out by the service agent
with dedicated tools to avoid any accidents.
• If the appliance is being connected directly to the mains electricity supply, an omnipolar
circuit-breaker must be installed with a minimum opening of 3mm between contacts.
• The installer must ensure that the correct electrical connection has been made and that it is
compliant with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised technicians only.
This appliance comes with the power cable supplied (1.2m 4 core 2.5mm
Connect to the electricity supply
Warning: Ensure that the power rating of the appliance is compatible with a 25Amp supply before
connecting to the electricity supply. Check with an electrician whether the domestic wiring system is
suitable without alterations.
Should the mains lead of the appliance ever require replacing, we recommend that this is carried
The bottom surface and the power cord of the hob are not accessible after installation.
TECHNICAL DATA
Hob Details
Building-in Dimensions A x B (mm) 560 X 490
Weight and Dimensions are approximate. Because we continually strive to improve our products we
Cooking hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size D x W x H (mm)
0
4 Zones
220-240V~ 50Hz or 60Hz
7400W
590 X 520 X 62
27
).
2
Advertisement
Table of Contents
