Intermec 70 User Manual page 112

Model 70 Pocket PC User's Guide
5. Enter a name for the connection, such as "ISP Connection."
6. In the Select a modem list, select your modem type. If you are using an infrared
7. You should not need to change any settings in Advanced. Most ISPs now use a
8. Enter the access phone number and tap Next.
9. Select other desired options and tap Finish.
10. On the Dialing tab, specify your current location and phone type (most phone lines
Once you have created the connection, it appears in
start the connection, remove your Pocket PC from the cradle, tap the connection icon,
enter your user name and password, and tap Connect. Once connected, you can:
•
•
Note: You can quickly return to Modem Settings to change connection settings by
tapping the Modem link at the bottom of the Connections folder. To return to the
Connections folder, tap the Connections link.
6-6
modem, select Generic IRDA modem. If you are using an external modem that is
connected to your Pocket PC with a cable, select Hayes Compatible on COM1.
server-assigned address. If the ISP you are connecting to does not use a server-
assigned address, tap Advanced and then the TCP/IP tab and enter the address.
When finished, tap ok and then Next.
are tone). These settings will apply to all connections you create.
Send and receive e-mail messages using Inbox. Before you can use Inbox, you need
to provide the information it needs to communicate with the e-mail server. For
specific instructions, see "Connecting Directly to an E-mail Server," later in this
chapter.
Visit Web pages using Pocket Internet Explorer. For more information, see Chapter
4, "Microsoft Pocket Internet Explorer."
, Programs, Connections. To