Setting Dos Applications; Setting Rs-232 Parameters; (For Symbol Ls3203 Or Ls3603 Scanners); Set All Defaults - Intermec 5055 User Manual

SECTION 2 Operation

Setting DOS Applications

In AUTOEXEC.BAT, make sure the scanner driver is
loaded in the PS/DOS section with 65SCN7B-E-W.
" NOTE:
PCS scanners do NOT require RS-232 setup.

Setting RS-232 Parameters

(for Symbol LS3203 or LS3603 Scanners)

Tethered laser power is always on, so a tethered laser can
scan, decode, and send the data as soon as it is connected,
even when it is not properly configured. Therefore, proper
operation of the tethered laser is no indication that the la-
ser is correctly configured for the scanner driver 65SCN7B.
Scan the following bar codes to set up your LS3203ER-
I200A or LS3603-I200A scanner so it will work with your
computer. Scan all the bar codes (except for the Host
Transmit Code ID Character and Host Decode Options) to
enable your scanner to use the 65SCN7B scanner driver.

Set All Defaults

Scan the Set All Defaults bar code to set up your scanner
for RS-232 serial communication.
5055 Data Collection PC User's Guide 2-21