Special Accessories - Stihl TS 700 Instruction Manual

English
Diamond cutting wheels
Minimum outside diameter of
1)
front thrust washer:
3)
Max. depth of cut:
1)
For Japan 140 mm
3)
When using thrust washers with an
outer diameter of 140 mm, the
maximum cutting depth is reduced
to 130 mm
Sound and vibration levels
When determining sound and vibration
levels, idling and full load are taken into
account in a ratio of 1:6.
For further details concerning
compliance with the employers'
Directive on vibration 2002/44/EEC, see
www.stihl.com/vib/
Sound pressure level L
peq
EN ISO 11201
TS 700:
TS 800:
Sound pressure level L
weq
ISO 3744
TS 700:
TS 800:
Vibration acceleration a
hv,eq
ISO 19432
Handle, left
2
TS 700: 6.6 m/s
2
TS 800: 6.5 m/s
The K-value in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
the sound pressure level and sound
38
power level; the K-value in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration measurement.
103 mm
145 mm
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
to
101 dB(A)
100 dB(A)
to
113 dB(A)
113 dB(A)
to
Handle,
right
2
4.5 m/s
2
3.9 m/s

Special Accessories

2
– Set of tools
– STIHL cut-off machine cart FW 20
– Attachment kit for cut-off machine
FW 20
– Water tank mounting kit
– Pressurized water tank mounting kit
– Cutting direction indicator
– Set of wheels
Ask your STIHL dealer for current
information on this and other special
accessories.
TS 700, TS 800