Special Accessories - Stihl MS 191 T Instruction Manual

English / USA
Guide bar
STIHL reduced kickback bar
(with green label) for 3/8" P pitch:
- Picco Micro Mini,
groove width 0.04 in (1.1 mm)
- Picco Micro,
groove width 0.05 in (1.3 mm)
Rollomatic with sprocket nose
12 or 14 in (30 or 35 cm)
Oilomatic chain
STIHL low kickback chain*
(with green label)
3/8" (9.32 mm) Picco-Micro Mini
(61 PMN)
3/8" (9.32 mm) Picco-Micro 1 (63 PM 1)
Chain sprocket:
6-tooth for 3/8" Picco pitch
Since new bar/chain combinations may
be developed after publication of this
manual, ask your STIHL dealer for the
latest recommendations.
In order to comply with the kickback
performance requirements of § 5.11 of
ANSI standard B 175.1-2000, do not use
replacement saw chain unless it has
been designated as meeting the ANSI
§ 5.11 requirements on this specific
powerhead, or has been designated as
"low kickback" saw chain* in accordance
with the ANSI B 175.1-2000 standard.
* See definition of "low kickback
chain" on page 17 of this manual.
48

Special Accessories

File holder with round file
Filing gauge
Reference gauges
STIHL lubricating grease
STIHL filler nozzle for STIHL
canisters
helps avoid spills and overfilling during
refueling.
Contact your STIHL dealer for more
information on these and other special
accessories.
Ordering Spare Parts
Please enter your saw model, serial
number as well as the part numbers of
the guide bar and saw chain in the
spaces provided. This will make
re-ordering simpler.
The guide bar and saw chain are subject
to normal wear and tear.
When purchasing these parts, always
quote the saw model, the part numbers
and names of the parts.
Model
Serial number
Guide bar part number
Chain part number
For recommended STIHL reduced
kickback cutting attachments
see section "Specifications"
of this Owner's Manual.
MS 191 T