Table of Contents
Advertisement
28 Special Accessories
27.9
Exhaust Emissions
The CO
value measured in the EU type appro‐
2
val procedure is specified at
www.stihl.com/co2
in the product-specific technical data.
The measured CO
value was determined on a
2
representative engine in accordance with a
standardized test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this User Manual. The oper‐
ating license shall be void if the engine is modi‐
fied in any way.
28 Special Accessories
– Spiked bumper
– File holder with round file
– Filing gauge
– Reference gauges
– STIHL lubricating grease
– STIHL filler nozzle for fuel – helps avoid spills
and overfilling during refueling
– STIHL filler nozzle for chain oil – helps avoid
spills and overfilling
Contact your STIHL dealer for more information
on these and other special accessories.
28.1
Mounting the Spiked Bumper
► Secure the spiked bumper (1) to the engine
housing with the two screws (2).
29 Ordering Spare Parts
Please enter your saw model, serial number as
well as the part numbers of the guide bar and
saw chain in the spaces provided. This will make
re-ordering simpler.
0458-506-0121-C
The guide bar and saw chain are subject to nor‐
mal wear and tear. When purchasing these
parts, always quote the saw model, the part
numbers and names of the parts.
Model
Serial number
Guide bar part number
Chain part number
30 Maintenance and Repairs
Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
When repairing the machine, only use replace‐
ment parts which have been approved by STIHL
for this power tool or are technically identical.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
machine.
STIHL recommends the use of original STIHL
replacement parts.
Original STIHL parts can be identified by the
STIHL part number, the { logo and the
STIHL parts symbol K (the symbol may appear
alone on small parts).
1
2
31 Disposal
Contact the local authorities or your STIHL serv‐
icing dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
English
37
Advertisement
Table of Contents
