Page 1
Thanks for purchasing the iDaSer-9000 module - the data management server. This Quick Start Guide will provide related information which needed to get start with the iDaSer-9000 module. Please also consult the user manual for detailed information on the setup and usage of the iDaSer-9000 module.
Page 2
Appearance Name Description Turn ON / OFF. Keep pressing for 3 seconds, and the network setting Reset will be reset as default.(Reboot after this action) UART The interfaces of RS-232 and RS-485(Reserved) On purpose to connect USB or keyboard. Ethernet Two network cards for internal and external network.
Page 3
LED Indicator The iDaser-9000 module provides six LED indicators. The Following is an overview of the purpose and function of each LED indicator together with a description. LED name. LED state LED Description PWR (G) The power of the module is ON.
Page 4
Ethernet The Ethernet status indicator on iDaSer-9000 is part of the built-in RJ-45 connector, such as shown in the figure below. LED Status LED Name LED Description Normal operation. 10/100M Ethernet lost connection. Link/Act Flashing System is handling data.