Download Print this page
Major tech MT155 Instruction Manual

Major tech MT155 Instruction Manual

Coating thickness meter

Advertisement

Quick Links

INSTRUCTION MANUAL
MT155
COATING THICKNESS METER

Advertisement

loading
Need help?

Need help?

Do you have a question about the MT155 and is the answer not in the manual?

Questions and answers

Summary of Contents for Major tech MT155

  • Page 1 INSTRUCTION MANUAL MT155 COATING THICKNESS METER...
  • Page 2: Lcd Display

    Introduction Thank you for your purchase of the Coating Thickness Tester. The MT155 is a compact and handy gauge specifically designed for non-destructive, fast and precise coating thickness measurements. The principal application is for corrosion protection. It is ideal for manufacturers, for offices, specialist advisers, for paint shops, electroplaters, for the chemical, automobile, shipbuilding, aircraft industries and for light or heavy engineering.
  • Page 3 Tester Layout LCD display Select key: For ON/OFF, SELECT and OK Up key: For upward selection and working mode switch Clear Key: Calibration Zone of the FE and NFE Housing Back Key: For return or to delete the last measured data Down key: For downward selection or working mode switch Probe Battery cover...
  • Page 4 Select Working Mode Working Mode: • There are 31 working modes in this gauge. Measurement data will not be stored when the gauge is in Group0 measurement mode. • In the other 30 working modes, 30 measured data can be stored in each mode cycle.
  • Page 5 Auto Power Off You can disable AUTO-POWER-OFF via MENU system or the gauge will automatically power off in ±3 minutes if not in use. Press the SELECT button to enter the menu Press the UP/DOWN button to SELECT THE SETTING Press the SELECT button to ENTER THE SETTING Press the UP/DOWN button to select AUTO-POWER-OFF Press the SELECT button to ENTER...
  • Page 6 Calibration and Measurement The gauge can calibrate Zero-point of Fe or Non-Fe, or DELETE wrong calibrated zero-point of Fe or Non-Fe. It is recommended that the zero-point be calibrated before use. Zero-point Calibration of Fe or Non-Fe • Press and hold the ZERO button to Zero-point the calibration of the Fe or Non-Fe measuring mode •...
  • Page 7: Specifications

    Specifications Sensor probe Non-Fe Working principle Magnetic induction Eddy current principle Measuring range 0~1350µm 0~1350µm 0~53.1mils 0~53.1mils Guaranteed tolerance 0~1000um 0~1000um (of reading) ±(2.5%+2um) ±(2.5%+2um) 1000~1350um (±3.5%) 1000~1350um (±3.5%) 0~39.3mils 0~39.3mils (±2%±0.08 mils) (±2%±0.08 mils) 39.3~53.1mils (±3.5) 39.3~53.1mils (±3.5) Precision 0~100um (0.1urn) 0~100um (0.1urn) 100um~1000um (1um)
  • Page 8 MAJOR TECH (PTY) LTD South Africa Australia www.major-tech.com www.majortech.com.au sales@major-tech.com info@majortech.com.au...