Circuit 1: Blinking An Led - Keyestudio KS0436 Kit Manual

Circuit 1: Blinking an LED

Blinking an LED is the classic starting point for learning how to
About this circuit:
program embedded electronic components.
In this circuit, you'll write code that makes an LED blink on and off.
REV4 Baseplate
What You Need:
Red LED x 1


220Ω Resistor x 1

Jumper wires x 2

USB cable x 1

Component Introduction:
They come in different colors, brightnesses and sizes. LEDs have a
LIGHT-EMITTING DIODES (LEDS):
18