Project 2: Led Light - Keyestudio EASY PLUG Ultimate Starter Kit Manual

90
Project 2: LED Light
Overview
To start off the EASY Plug sensor module, we will work on an LED. That's right
- it is as simple as turning a light on and off. It might not seem like much, but
establishing this important baseline will give you a solid foundation as we
work toward more complex experiment.
Component Required:
 EASY plug control board*1
 EASY plug LED Module *3
 RJ11 cable*1
 USB cable*1
Component Introduction:
EASY plug LED Module
The LED light modules have shiny colors, ideal for Arduino starters. It can be
easily connected to IO/Sensor shield.
Note: this module needs to be used together with EASY plug control board.
You can also choose other LED to emit different color of light like white, blue,
green, yellow and red.
 Sensor type: Digital
 Interface: Easy plug
 PH2.54 socket
Connect It Up
Connect the EASY Plug LED module to control board using an RJ11 cable.