Table of Contents
Advertisement
Available languages
Available languages
DAMAGE-SHIPMENT/INSTALLATION
• If the unit is damaged in shipment, return the unit to the store in which it was bought for repair or replacement.
• If the unit is damaged by the customer, repair or replacement is the responsibility of the customer.
• If the unit is damaged by the installer (if other than the customer), repair or replacement must be made by
arrangement between customer and installer.
PARTS INCLUDED
Part Description
Mounting-Plate
exhaust adaptor
Top Cabinet
Template
Rear Wall Template
Installation
Instructions
Separately Packed
Grease Filter
You will find the installation accessories contained in a packet with the unit. Check to make sure you have all these
parts.
NOTE: Some extra parts are included.
TOOLS YOU WILL NEED
#1 and #2 Phillips
screwdrivers
Tin snips
(to cut damper, if needed)
Gloves
Saw
(saber, hole, or keyhole)
General Information
Quantity
1
1
1
1
1
2
Pencil
Scissors
(to cut template, if needed)
Electric drill with
Safety goggles
Level
INSTALLATION ACCESSORIES
Part Description
Ruler or tape measure
straight edge
" , 1 2" , and
" bits
Duct and masking tape
6
Wood Screw (¼" x 2")
Wing nut
Machine Screw
(
3
" x 3")
/
16
Self-aligning
Machine Screw
(¼"-20 x 3")
Nylon Grommet (for metal
cabinets)
Washer
Sheet Metal Screw
Blower Plate Screws
Carpenter square
(optional)
Filler blocks or scrap wood
pieces(for top cabinet
spacing in recessed bottom
cabinet installations, if
needed)
Edge-to-
or Hammer(optional)
Quantity
2
2
2
2
1
2
2
3
Advertisement
Table of Contents
