Outside Back Exhaust (Horizontal Duct); B1. Preparing The Rear Wall Template For Outside Back Exhaust - Avanti MOTR14K3S-IS Installation Instructions Manual

Hide thumbs Also See for MOTR14K3S-IS:

Table of Contents

Available languages

OUTSIDE BACK EXHAUST (HORIZONTAL DUCT)

INSTALLATION OVERVIEW

B1: Preparing the rear wall template for outside back

exhaust.

B2: Attache the mounting plate to the wall

B3: Use top cabinet template for preparation of the top

cabinet.

B4: Adapting microwave blower for outside back exhaust.

B5: Mount the microwave oven.

B1: PREPARING THE REAR WALL TEMPLATE FOR OUTSIDE BACK EXHAUST.

You need to cut an opening (12" x 4" square hole) in the rear wall template for outside exhaust.

• Read the instruction on the rear wall template.

• Tape it to the rear wall, lining up with the holes previously drilled for holes A and B in the wall plate.

• Cut the opending, following the instruction of the rear wall template.

Step – by – Step Installation Guide

Table of Contents