A1. Attach Mounting Plate To The Wall - Avanti MOTR14K3S-IS Installation Instructions Manual

A: OUTSIDE TOP EXHAUST (VERTICAL DUCT)
INSTALLATION OVERVIEW
A1: Attached the mounting plate to the wall.
A2: Use top cabinet template for preparation of the
cabinet.
A3: Check for proper damper operation.
A4: Mount the microwave oven.
A5: Adjust the exhaust adaptor.
A6: Connect Ductwork.
A1: ATTACH MOUNTING PLATE TO THE WALL
Attach the mounting plate to the wall using the wing nuts and machine screws (3/16" x 3"). At least one wood screw must
be used to attach the mounting plate to a wall stud.
1) Insert the machine screws (3/16" x 3") into the mounting plate through the holes designed to go into drywall and
attached the toggle wings to ¾" onto each machine screw (3/16" x 3").
2) Place the mounting plate against the wall and insert the toggle wings into the holes in the wall to mount the plate.
CAUTION: BE CAREFUL TO AVOID PINCHING FINGERS BETWEEN THE BACK OF THE MOUNTING PLATE AND
THE WALL.
3) Tighten all bolts. Pull the mounting plate away from the wall to help tighten the bolts.
Step – by – Step Installation Guide
14
To use toggle bolts
Spacing for Toggles More
Than Wall Thickness
Wing nut
machine
Moun�ng
screw
Plate
Wall
Bolt End