Advertisement
Quick Links
Required Crew: 3
Concrete: 12-16, 80 lb. bags
Required Tools:
● Wheelbarrow
● Step Ladder (6' or taller)
● Shovel
● Tape Measure
● Digging Bar or Pick
● Level
● Allen Wrench (Provided)
● Open end or Box Wrenches: ¾"
● Hammer or Mallet
● Ratchet Handle & Sockets: ¾"
● Marker Pen
● Drill: Cordless or electric, or impact driver
Component Playgrounds is concerned about the safety of your vision. It
is important that you choose to protect your vision by wearing proper
safety glasses during each and every phase of this construction
process.
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE BEGINNING
The AR20-10 can be installed as a one day project. The normal time
required to install the AR20-10 is about 4-6 hours for a three man crew.
This time requirement will vary dependent upon the composition of the soil
and the speed of the installers. Mix and pour the concrete as the last step.
*Before digging, please obey local laws by notifying your local
underground utilities marking organization*
Installation
Instructions
AR20-10
Advertisement
Related Manuals for Component Playgrounds AR20-10
Summary of Contents for Component Playgrounds AR20-10
- Page 1 PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE BEGINNING The AR20-10 can be installed as a one day project. The normal time required to install the AR20-10 is about 4-6 hours for a three man crew. This time requirement will vary dependent upon the composition of the soil and the speed of the installers.
- Page 2 #1 Assembling Arch Sections & Top Rail #2 Mark Location for Holes...
- Page 3 #3 Dig Arch Leg Holes for Cementing in the Set Set top section aside to complete digging holes. #4 Assembling Swing Hangers on Top Rail Mark and attach swing hangers on top rail. (See Next Page)
- Page 4 Component Playgrounds BRASS BUSHING SWING HANGER 1. Loosen and remove the two nyloc jam nuts. 2. Reassemble on to swing top rail. Tighten securely so that the hanger is firmly attached in place and cannot slide or swivel along top rail.
- Page 5 Step 5: 1. Slide the smaller end of the legs into the Arch Swing End. Find Arch Swing Bolt Pack. 2. Join together using 4 set screws per leg. 3. Tighten all set screws using allen wrench provided.
- Page 6 Step 6: Have two adults on opposite ends stand structure up into place. Stand up into holes.
- Page 7 Step 7: Make adjustments as needed to level out the structure...
- Page 8 When you are satisfied that the structure is level, mix and pour the concrete according to the package directions. You will use approximately four 80 lb. bags in each leg hole. Concrete will cure faster in warm conditions and slower in cold conditions.
-
Page 9: Read Before Use
Do not attempt to use equipment for something other than the use for which it was designed and intended, or in a manner other than that for which it was designed and intended. While every attempt is made by Component Playgrounds to ensure the highest degree of safety in all of our equipment, we cannot guarantee freedom from injury. The user assumes all risk of injury due to use. - Page 10 We hope that you and your family will enjoy many hours of great family fun while using your Component Playgrounds Products. We appreciate your business. Our goal is to provide safe, durable and fun products using the best materials available. Your product should be mostly maintenance free.
- Page 11 This damage to the galvanizing is restricted to the actual weld. When your equipment is built, Component Playgrounds will repair this damage using a cold galvanizing compound spray along with a top coat of silver aluminum.
- Page 12 To Help Prevent Injuries from Falls & Other Hazards 1. Never attach, or allow children to attach the following items to your swing set: Ropes, jump ropes, clotheslines, pet leashes or any similar type of item to your swing set. Any item such as these may present a strangulation hazard.
- Page 13 Warranty Component Playgrounds works to build heavy duty products that will stand up to the heavy use of active children. You can trust Component Playgrounds because of the way we design and build our products. We make products that are simple to own, and easy to maintain.
-
Page 14: Warranty Registration Sheet
Return this form via e-mail to: State: Zip: Sales@componentplaygrounds.com Phone: Or via U.S. mail to: Purchase Date: Completion Date: Component Playgrounds 1630 North Beck Street Sales Representative/Dealer Information Salt Lake City, UT 84116 (If different from manufacturer) Organization: Todays Date: City:...
Need help?
Do you have a question about the AR20-10 and is the answer not in the manual?
Questions and answers