Precautions For Use - i-PRO WV-U61300-ZY Basic Information

Precautions for use

When the product is accessible from the
Internet
To prevent unauthorized access, note the
following.
• Leave user authentication turned on.
• Periodically change passwords that are
used to access the product.
Refer to the Operating Instructions for infor-
mation about how to change passwords.
To keep on using with stable performance
Do not use this product in hot and humid con-
ditions for a long time. Failure to observe this
causes component degradation resulting in life
shortening of this product. Do not expose this
product to direct heat sources such as a
heater.
Usage such as switching the power ON/
OFF frequently could lead to failure of the
camera.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to the product. Failure to observe this
may cause trouble.
Do not directly touch the dome cover with
your bare hands.
A dirty dome cover causes deterioration of
picture quality.
When an error is detected, this product
will restart automatically.
This product will be inoperable for around
2 minutes after the restart just as when the
power is turned on.
About the automatic status detection function
When this product malfunctions due to exoge-
nous noise, etc. for 30 seconds or more, the
product will automatically restart and will return
to normal state. When the product is restart,
initialization will be carried out as when the
power of the product is turned on. When the
product repeatedly resets, exogenous noise
level around the product may be high and that
may cause malfunction. Contact your dealer
for instructions.
Periodically images on the screen appear
to be distorted
When the camera is installed in a location where
it is subject to small vibrations (for example,
when it is installed near devices that vibrate),
images may appear distorted and stretched
lengthways. This phenomenon is a characteris-
tic of image pickup devices that use CMOS
sensors and is caused by the relationship
between the periodic movements of the cam-
era and the timing that the image sensor reads
images. This is not a problem with the camera.
To reduce the possibility of this phenomenon
occurring, install the camera in a secure location.
We shall not be liable for content compen-
sation, losses of recorded or edited con-
tent and any direct or indirect consequent
damages caused by failure to record or
edit due to faults with this unit or the
microSD memory card. In addition, the
same provisions apply after unit is reparied.
About the CMOS image sensor
• When continuously shooting a bright light
source such as a spotlight, the color filter of
the CMOS image sensor may become dete-
riorated and this may cause discoloration.
Even when changing the fixed shooting
direction after continuously shooting a spot-
light for a certain period, the discoloration
may remain.
6