i-PRO WV-U61300-ZY Basic Information page 13

B LINK indicator
• When the camera is able to communicate with
the connected device
C ACT indicator
• When data is being sent via the network camera
D
SD MOUNT indicator
• When a microSD memory card is inserted and could
be recognized
• When data can be saved after the microSD memory
card is inserted and the SD ON/OFF button is pressed
(less than 1 second)
• When data can be saved to the microSD memory card
• When the microSD memory card is removed after
holding down the SD ON/OFF button
(about 2 seconds)
• When data cannot be saved to the microSD memory
card because an abnormality was detected or the
microSD memory card is configured not to be used
Note:
• Lighting/blinking LED can be turned off with the software settings at any time. (The initial state
is lighting or blinking.) Set the LED to be solid off if necessary, depending on the installation
conditions. (☞ Operating instructions on our support website)
E SD ON/OFF button
(1) When the SD ON/OFF button is pressed (less than 1 second), the SD MOUNT indicator
lights up in green and data can be saved to the microSD memory card.
(2) When the SD ON/OFF button is held down (about 2 seconds), the SD MOUNT indicator
lights off and the microSD memory card can be removed.
Lights orange
Blinks green (accessing)
Lights off → Blinks green → Lights off
Lights off → Lights green
Lights green
Lights green → Blinks green →
Lights off (recording)
Lights green → Lights off
(waiting for recording)
Lights off
13