Setting Up And Using The Accessibility Features - Lexmark CS943 User Manual

Set up, install, and configure

Setting up and using the accessibility features

Activating Voice Guidance
From the home screen
1
In one motion and using one finger, slowly swipe left then up on the display until you hear a voice message.
2
Using two fingers, touch OK.
Note: If the gesture does not work, then apply more pressure.
From the keyboard
1
Press and hold the 5 key until you hear a voice message.
2
Press Tab to navigate the focus cursor to the OK button, and then press Enter.
Notes:
•
When Voice Guidance is activated, always use two fingers to select any item on the display.
•
Voice Guidance has limited language support.
Deactivating Voice Guidance
1
In one motion and using one finger, slowly swipe left then up on the display until you hear a voice message.
2
Using two fingers, do either of the following:
•
Touch Voice Guidance, then touch OK.
•
Touch Cancel.
Note: If the gesture does not work, then apply more pressure.
You can also deactivate Voice Guidance by doing either of the following:
•
Using two fingers, double tap the home screen.
•
Press the power button to put the printer in Sleep or Hibernate mode.
Navigating the screen using gestures
Notes:
•
Most of the gestures are applicable only when Voice Guidance is activated.
•
Enable Magnification to use the zoom and pan gestures.
•
Use a physical keyboard to type characters and adjust certain settings.
Gesture
Swipe left then up using one finger
Double‑tap using one finger
Function
Launch Accessibility mode. Use the same gesture to exit Accessibility mode.
Note: This gesture is also applicable when the printer is in normal mode.
Select an option or item on the screen.
39