Table of Contents
Advertisement
Use printer menus
Menu item
Printer Emulations
PPDS Emulation
Off*
On
Printer Emulations
PS Emulation
Off
On*
Printer Emulations
Enable Prescribe
Off*
On
Printer Emulations
Emulator Security
Page Timeout (60 minutes*)
Reset Emulator After Job (Off*)
Disable Printer Message Access (On*)
Print Configuration
Black Only Mode
Off*
On
Print Configuration
Color Trapping
Off
1
2*
3
4
5
Print Configuration
Font Sharpening
0–150 (24*)
Device Operations
Quiet Mode
Off*
On
Device Operations
Panel Menus
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to recognize and use the PPDS data stream.
Set the printer to recognize and use the PS data stream.
Enable Prescribe emulation.
Configure the security settings of the printer during emulation
mode.
Set the printer to print always color content in grayscale .
Enhance the printed output to compensate for misregistration
in the printer.
Set a text point-size value below which the high‑frequency
screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or
less use the high‑frequency screens.
Change the amount of noise that the printer produces.
Note: Enabling this setting slows down the overall
performance of the printer.
Enable access to the printer menus from the control panel.
183
Advertisement
Table of Contents
