Timer Modes; How To Program; Battery Replacement - Intermatic DT17 Install And Operation Instructions

Timer Modes

MODE
Push and release MODE to
change the mode.
The modes are Countdown
timer, Off, Auto, On, and Rand.
Countdown timer mode
In countdown timer mode the
clock symbol is displayed (a).
a
When countdown timer mode is
entered the countdown time is set
to 75 minutes (b).
And the plugged in light(s) are
turned on (c).
The countdown timer can be set to turn the plugged in
light(s) on or off after 75, 60, 45, 30 or 15 minutes. That
lets you, for example, set the timer to turn the plugged in
light(s) off an hour after you have left the room. The flash-
ing alarm clock symbol indicates the DT17 is in countdown
timer mode.
To set the countdown timer:
Push and release MODE until the countdown timer clock is
displayed. (75 minutes is selected.)
If desired, push and release MIN to switch change the
countdown to 60, 45, 30, 15 or 0 minutes.
If desired, push and release PROG ON/OFF to switch the
initial state of the plugged in light(s).
Wait ten seconds or push and release TIME SET to start
the countdown.
While counting down the countdown
timer clock symbol flashes, and you
can push TIME SET to switch
between the countdown the current
time.
When the countdown reaches 00:00
the connected light(s) are switched
and the clock display remains 00:00 (d).
Off Mode
In the Off mode the plugged in
light(s) are off. You can push PROG
ON/OFF to switch to ON mode and
turn the plugged in light(s) on.
Auto Mode
In auto mode the programmed on
and off times automatically switch the
plugged in light(s) on and off. See
how to program the timer, below for
how to enter or change the automatic
program times.
You can push PROG ON/OFF while in Auto mode to
manually override the program and turn the plugged in
light(s) on or off. The programmed switching times remain.
The timer stays in auto mode.
On Mode
In the On mode the plugged in
RESET
TIME SET light(s) are on. Push PROG
ON/OFF to turn the plugged in
ON/OFF
light(s) off and switch the mode to
DS
DAY HOUR MIN PROG MODE
Off.
MODE
Rand Mode
In Random mode the DT17
b c
randomly switches the connected
light(s) on and off. A random on
period is + 15 minutes from the
programmed times.
How to program the timer:
You can program the timer in Auto, ON or Off modes.
The program is followed in Auto
mode.
1. Push and release PROG to start
the programming.
Prg 1 is displayed and the display
shows --:-- or the programmed time
for Prg 1. timer on (lit light bulb symbol on).
--:-- display means there is nothing programmed for that
Prg number and on/off time.
Note: You can push and
release ON/OFF to switch
between the Prg # on
time and the Prg # off
time. The light bulb
d
symbol switches on or off
but the plugged in light(s)
do not.
2. Push and release DAY
to choose the day*.
*
Push and release DAY several times to set: a single
day MO, TU, WE, TH, FR, SA, OR SU; or all week (all
days of week displayed); or weekdays (MO TU WE TH
TH
FR displayed); or weekends (SA SU displayed); or all
AM
days but sunday (MO TU WE TH FR SA displayed).
3. Push and release HOUR to choose the hour.
Off
4. Push and release MIN to choose the minute.
5. When correct, push ON/OFF to switch between
programming on time and off time for that Prg number.
6. Repeat steps 2, 3, and 4 to set the Off program.
7. Push PROG to Prg 2, Prg 3,... up to Prg 14, to
TH
AM
program additional on and /or off times.
8. Push TIME SET or wail 15 seconds to exit
Auto
programming.
After the program is set, turn lamp or appliance ON and
plug it into the timer. Plug the timer into a wall
receptacle.

Battery replacement

TH
Batteries retain the program during power outages.
AM
Batteries should last 3 years or more if the timer is left
plugged in. If the display is dim, weak or
On
unreadable when the timer is unplugged from
the outlet replace the batteries. After removing
the batteries from the unit, you have a minimum
of 15 seconds to
TH insert new batter-
AM
ies without losing
existing program.
Rand
The DT17 uses
two SR44 or LR44
alkaline batteries.
Purchase fresh
batteries. Unplug
the DT17. Follow
the directions out-
lined in Battery Installation.
AM
Prg
Auto
FULL ONE YEAR WARRANTY
If within one (1) year from the date of purchase, this product fails due to a
defect in material or workmanship, Intermatic Incorporated will repair or
replace it, at its sole option, free of charge. This warranty is extended to the
original household purchaser only and is not transferable. This warranty
RESET
does not apply to: (a) damage to units caused by accident, dropping or
7
AM
Prg TIME SET
abuse in handling, acts of God or any negligent use; (b) units which have
Auto
been subject to unauthorized repair, opened, taken apart or otherwise
ON/OFF
modified; (c) units not used in accordance with instructions; (d) damages
5
exceeding the cost of the product; (e) sealed lamps and/or lamp bulbs,
DAY HOUR MIN DS PROG MODE
LED's and batteries; (f) the finish on any portion of the product, such as
surface and/or weathering, as this is considered normal wear and tear; (g)
2 3 4 1, 6
transit damage,initial installation costs, removal costs, or reinstallation
costs.
INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS
OR IMPLIED WARRANTIES. ALL IMPLIED WARRANTIES, INCLUDING
THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO
EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL
BE OF THE SAME DURATION AS THE WARRANTY PERIOD STATED
ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON THE
DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state. Warranty service is available by
mailing postage prepaid to: Intermatic Incorporated/After Sales
Service/7777 Winn Rd., Spring Grove, IL 60081-9698/815-675-7000
http://www.intermatic.com Please be sure to wrap the product securely to
avoid shipping damage.
ART195B
+
ALKALINE
CELL