Fisher & Paykel DW60U2I2 User Manual page 33

PROBLEM POSSIBLE CAUSE
Plastic Not enough detergent,
items are
not pre-rinsed.
discoloured
(e.g. stain left
by tomato
sauce)
Display
This is normal. The display
flashing while remains on although the
Keylock is on buttons are disabled.
White stains Not enough detergent.
are left
on dishes;
glasses
Rinse aid dosage too low.
have a milky
appearance
Dishes,
Rinse aid dosage too low.
cutlery have
not dried
Items removed too soon.
Rinse aid dispenser empty.
(The rinse aid indicators
are lit.)
Glasses Rinse aid dosage too low.
have dull
appearance
Tea stains Not enough detergent.
or traces of
lipstick have
not been
Wash temperature too low.
completely
removed
Traces of rust Cutlery is not
on cutlery
sufficiently rustproof.
Glasses Hard water situation.
clouded and
Glasses are not
discoloured;
dishwasher proof.
milky coating
TROUBLESHOOTING
WHAT TO DO
Pre-rinse plastic dishes before
placing in the dishwasher and/or add
more detergent.
Alternatively, using the Rinse
program after adding dishes may
minimise staining.
No action required.
Refer to 'Detergent' for recommended
quantities. You may need to adjust these
to suit the hardness of your water supply.
Increase rinse aid dosage.
Refer to 'Rinse aid'.
Increase rinse aid dosage.
Refer to 'Rinse aid'.
After the end of the wash program, leave
the door ajar and wait for several minutes
to help drying.
Add rinse aid. Refer to 'Rinse aid'.
Increase rinse aid dosage.
Refer to 'Rinse aid'.
See section 'Detergent' for recommended
quantities. You may need to adjust these
to suit your particular load.
Select a wash program for heavily
soiled dishes. Refer to 'Wash programs'
for information.
Wash by hand.
Increase detergent quantities.
Wash by hand.
33