Table of Contents
Advertisement
4 | Advanced Adjustments / Settings
Analog Adjustment - Phase
Flickering or bleeding of the screen as a whole can be minimized.
Note
• Flickering or bleeding may not fully disappear, depending on the PC and graphics board you are
using.
• If vertical stripes appear on the screen after completing the setting, adjust "Clock" again.
Analog Adjustment - Hor. Position / Ver. Position
The display position (horizontal, vertical) of the screen can be adjusted.
Note
• The number of pixels and the pixel positions of the LCD monitor are fixed, so there is one correct
display position for images. Position adjustment is for adjusting an image to the correct position.
4.2.3 Preferences
The monitor's settings can be configured to suit the usage environment or personal
preference.
Power Save
Settings: "On" / "Off"
The monitor can be set to enter power saving mode according to the state of the PC.
The monitor changes to power saving mode about 15 seconds after signal input ceases to
be detected.
When the monitor has shifted to power saving mode, images are not displayed on the
screen and audio is not output.
• How to exit power saving mode
– Press the
– The monitor automatically exits power saving mode when the monitor receives input
24
button or
button.
Advertisement
Table of Contents
