Table of Contents
Advertisement
2. Click "Hardware and Sound" - "Tablet PC Settings".
The "Tablet PC Settings" screen appears.
3. In the "Display" tab, click "Setup".
The white touch screen specification screen appears in the background.
Attention
• If using the monitor in a multi-monitor environment, specify the touch screen according to the
screen that is displayed.
4. Touch the screen with your finger.
The screen that is touched is recognized as the touch screen.
5. Click "Calibrate".
A white screen appears in the background.
Attention
• If using the monitor in a multi-monitor environment, select the monitor to be used for correcting
the touch position in the "Display" pull-down menu, and then click "Calibrate".
6. Touch the touch marker (cross) with your finger for a few seconds and then release your
finger.
Sixteen touch markers are displayed on the top left, top right, bottom left and bottom
right of the screen in sequence.
Note
• On the second and subsequent times, the touch markers appear in four locations. If you want to
display the touch markers in 16 locations again, press "Reset" in the "Tablet PC Settings".
7. When you have finished correcting the touch position, click "Yes" and save the
adjustment data.
8. Click "OK" to close the screen.
Touch Panel Settings | 3
15
Advertisement
Table of Contents
