Table of Contents
Advertisement
4 | Advanced Adjustments / Settings
Note
• Setting example
Full-screen
Sharpness
Settings: "-2" – "2"
When a low-resolution image is displayed using picture expansion mode ("Full Screen" or
"Aspect Ratio"), the text and lines of the image may appear blurry. This blurriness can be
reduced by configuring the settings for sharpness.
Note
• For some display resolutions, it is not necessary to configure the settings for sharpness.
("Sharpness" is not a value that can be selected.)
Input Color Format
Settings: "Auto" / "YUV 4:2:2
The color format of the input signal can be specified.
Try changing this setting if colors are not displayed correctly.
*1
Only enabled during HDMI input
*2
Only enabled during DisplayPort input
Input Range
Settings: "Auto" / "Full" / "Limited"
Depending on the video reproduction device, there may be a restriction on black and white
video signal levels output to the monitor. This kind of signal is called "Limited range". On the
other hand, unlimited signals are called "Full range".
• "Auto"
Input signal brightness range is automatically judged and is displayed appropriately
(recommended setting). Depending on the video reproduction device, Limited range and
Full range may not be able to be judged by the monitor. In such a case, selecting "Full"
or "Limited" will allow it to be displayed appropriately.
• "Full"
To be selected in case of Full range signals. Appropriate display can be obtained when
this is selected, in case both blacks and whites are corrupted.
• "Limited"
To be selected in case of Limited range signals. In case this is selected, the output
signal range is expanded from 0 to 255 to obtain an appropriate display when black is
pale and white is dull.
22
Fixed aspect ratio
*1
*1
" / "YUV 4:4:4
" / "YUV
Actual size (input signal)
*2
" / "RGB"
Advertisement
Table of Contents
