Table of Contents
Advertisement
1 | Introduction
1.3.2 Rear
1
2
3
1. Handle
2. Stand
3. Security lock slot
4. Cable holder
5. USB Type-A connector
(USB downstream port)
6. Main power switch
7. Power connector
8. DVI-D connector
9. DisplayPort input
connector
10. DisplayPort output
connector
11. USB Type-B connector
(USB upstream port)
18
6
7
This handle is used for transportation.
Attention
• Firmly hold the monitor by the handle and the bottom while
carrying it, and do not put pressure on the LCD panel or drop
the monitor.
Adjusts the height and angle (tilt, swivel. rotation) of the monitor.
Complies with Kensington's MicroSaver security system.
Holds the monitor cables.
Connect it to a USB device. To set up a daisy-chain connection,
connect the cable to the USB upstream port of another monitor.
Turns the main power on or off.
: Off,
Connects the power cord.
Connect it to the PC.
To set up a daisy-chain connection, connect the cable to the
DisplayPort input connector of another monitor.
Connect this port to the PC when you use software that needs a
USB connection or you connect a USB device (a peripheral device
that supports USB) to the USB downstream port.
8
9
: On
4
5
10
11
Advertisement
Table of Contents
