Table of Contents
Advertisement
ADJUSTING THE HEIGHT
The front panel of the warming drawer can be adjusted vertically to align with the
surrounding cabinetry.
1
max 2mm
2
3
12
FP WARMER DRAWER INTERFACE LOGIC_V1
Open the drawer fully, and slightly
loosen the screws.
ICE AND WATER INTERFACE COMPONENTS
All bezels capable of glowing white and red
except fot the on /o bezel which only needs
to glow red.
Component Layout As Shown.
ICE AND WATER INTERFACE COMPONENTS
Adjust to the required height and then
re-tighten the screws. The height is
All bezels capable of glowing white and red
adjustable within 1/16" (2mm).
except fot the on /o bezel which only needs
to glow red.
Component Layout As Shown.
Close the drawer and check the
alignment. Adjust again if necessary.
INSTALLER CHECKLIST
IMPORTANT!
1h
Read all installation instructions in this manual to see if the unit has been correctly installed.
Ensure that installation has been completed correctly before use.
Test operation:
2h
F
Open the drawer.
1h
Press the
button to turn the warming drawer on.
F
F
Shut the drawer.
2h
After 5-10 minutes, open the drawer to feel the internal surfaces of drawer is slightly
F
warmed.
Press the
button to turn the warming drawer off and shut the drawer.
F
Ensure that:
F
the warming drawer is level and securely fitted to the cabinetry
any internal packaging has been removed from the drawer
F
F
the isolating switch is accessible by the customer
F
the bottom shelf can fully support the total weight of the combined appliances
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer Address
Installer's Name
Installer's Signature
Installation Company
Installation Date
PRODUCT OFF
USER PRESSES ON/OFF BUTTON
1h
1h
2h
2h
PRODUCT OFF
USER PRESSES ON/OFF BUTTON
1h
1h
2h
2h
1h
THE THREE TEMPERATURE BUTTONS WORK
ONLY ONE CAN BE SELECTED AND SHOW
2h
THE OTHER TWO BUTTONS SHOW WHITE
1h
THE THREE TEMPERATURE BUTTONS WORK
ONLY ONE CAN BE SELECTED AND SHOW
2h
THE OTHER TWO BUTTONS SHOW WHITE
THE TWO TIMER BUTTONS WORK AS A UN
1h
ONLY ONE CAN BE SELECTED AND SHOW
THE OTHER BUTTON SHOWS WHITE
2h
THE TWO TIMER BUTTONS WORK AS A UN
1h
ONLY ONE CAN BE SELECTED AND SHOW
THE OTHER BUTTON SHOWS WHITE
2h
ALL OT
TEMPER
MEDIUM
HEATIN
ON/OF
AGAIN
ALL OT
TEMPER
MEDIUM
HEATIN
ON/OF
AGAIN
Advertisement
Table of Contents
