SAFETY AND WARNINGS WARNING! WARNING! Electric Shock Hazard Tip Hazard Failure to follow this advice may result in This product may tip. Keep children away and electrical shock or death. take care. Failure to follow this advice may result in injury. •...
When installed in combination with a companion product, the companion product can be placed directly onto the appliance. A built-in shelf at the base of the cabinetry must be able to support the weight of both products. WB60SMG1-SET, WB60SMB1-SET WB60SMTB1-SET Ensure the cabinetry is square and level and with correct dimensions.
UNPACK YOUR PRODUCT ELECTRICAL SPECIFICATIONS Remove the warming drawer and accessories box from the packaging. Recycle the materials All electrical work must be done by a qualified electrician, or a Fisher & Paykel trained and that can be reused. Dispose packaging materials in accordance with local regulations on waste supported service technician.
PRODUCT DIMENSIONS – 60CM MODELS WB60SMG1-SET WB60SMB1-SET PRODUCT DIMENSIONS WB60SDB1-SET A Overall height B Overall width C Overall depth*† D Height of chassis E Width of chassis F Depth of chassis** G Height of drawer front panel ISOMETRIC PLAN H Depth of drawer front panel and attachment flange†...
PRODUCT DIMENSIONS – 60CM TALL MODELS WB60SMTB1-SET WB60SDTB1-SET PRODUCT DIMENSIONS A Overall height B Overall width C Overall depth* D Height of chassis E Width of chassis F Depth of chassis** G Height of drawer front panel PLAN ISOMETRIC H Depth of drawer front panel and attachment flange I Depth of open drawer J Height from bottom of chassis to bottom...
CABINETRY DIMENSIONS – 60CM MODELS FLUSH INSTALL 20mm* PROFILE PLAN WB60SMG1-SET PROUD INSTALL WB60SMB1-SET CABINETRY DIMENSIONS WB60SDB1-SET A Minimum inside height of cavity B Minimum inside width of cavity C Minimum inside depth of cavity D Overall width of cabinetry...
CABINETRY DIMENSIONS – 60CM TALL MODELS FLUSH INSTALL 20mm* PROFILE PLAN PROUD INSTALL WB60SMTB1-SET WB60SDTB1-SET CABINETRY DIMENSIONS A Minimum inside height of cavity B Minimum inside width of cavity C Minimum inside depth of cavity D Overall width of cabinetry 20mm* E Minimum clearance between top of front panel and upper cabinetry panel F Minimum clearance between bottom of front panel and lower cabinetry panel...
INSTALLATION OPTIONS STANDALONE INSTALLATION COMBINED WITH SINGLE OVEN This installation is suitable for Minimal & Contemporary Warming drawers. A fixed shelf must This installation combines 60cm Warming Drawer with 60cm Fisher & Paykel wall oven. The be installed above the warming drawer. warming drawer can support the weight of the oven sitting directly on top.
Page 13
INSTALLATION OPTIONS COMBINED WITH COMPANION PRODUCT COMBINED WITH DOUBLE OVEN This installation combines 60cm Warming Drawer with 60cm Fisher & Paykel companion This installation combines 60cm Tall Warming Drawer with a 60cm Fisher & Paykel product. The warming drawer can fully support the weight of the companion product sitting double oven.
INSTALLATION OPTIONS INSTALLING THE DRAWER TRIPLE STACK COMBINATION This combination is suitable for 60cm Tall Warming Drawer. A shelf is required above the oven to support the 60cm companion product. Ensure the bottom shelf can fully support the weight Connect the power plug into the of all appliances.
INSTALL FRONT PANEL (SOLD SEPERATELY) ADJUSTING THE DEPTH The depth of the front panel of the warming drawer can be adjusted to align with the surrounding cabinetry. Adjust the clips at the front of both locating tabs. These clips determine the position of the front panel and can be adjusted as required.
ADJUSTING THE HEIGHT The front panel of the warming drawer can be adjusted vertically to align with the surrounding cabinetry. Open the drawer fully, and slightly loosen the T20 star head machine screws. max 2mm Adjust to the required height and then re-tighten the screws.
INSTALLER CHECKLIST PRODUCT OFF USER PRESSES ON/OFF BUTTON FP WARMER DRAWER INTERFACE LOGIC_V1 IMPORTANT! Read all installation instructions in this manual to see if the unit has been correctly installed. ALL OT Ensure that installation has been completed correctly before use. TEMPER MEDIUM Ensure that:...
Need help?
Do you have a question about the WB60SMG1-SET and is the answer not in the manual?
Questions and answers