Advertisement

Quick Links

R
MP90G User Manual V1.0
Learn how to set up your new MiCODUS Tracker
Copyright ©2022 MiCODUS | All Rights Reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MP90G and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for MICODUS MP90G

  • Page 1 MP90G User Manual V1.0 Learn how to set up your new MiCODUS Tracker Copyright ©2022 MiCODUS | All Rights Reserved...
  • Page 2: Main Features

    IP65 Voice Overspeed Vibration Geo-fence 3000mAh Monitor Alarm Alarm 2.Specifications Model MP90G Weight 120g Device Information Dimensions 76mm(L) * 40mm(W) * 27mm(H) Charging Time Around 6 hours Battery Working Time Tracking Mode, 1 minutes’ reporting: 5 days Working Voltage DC 3.4V - 4.5V...
  • Page 3: Activate Device

    Position Accuracy 5-10m External Interface Microphone, SOS,Type-C Recharging 3. Activate Device Install the SIM card via the correct direction as below: Normal SIM State Event Charging Solid POWER LED (RED) Charger inserted and battery has been fully charged Dark Charger has not been inserted Dark Flash every 1 second Searching for network...
  • Page 4: Package Content

    4. Package Content Main Unit MP90G Charging Cable Screws Screwdriver Rubber Pad SIM Card Slot Cover User Guide Genunie Packing Box 5. Functions Explanation Please follow with the quick user guide carefully! a. Voice Monitor: For example: * Set center number by this sms command:...
  • Page 5 Enable SOS Emergency Call For example: * Set sos alarm numbers via this sms command: MP90G SOS,A,1st number,2nd number,3rd number# SOS,A,12345678910# * Press the SOS panic button 3 times continuously, then the SET SOS NUMBER OK SOS emergency message and call will be sent out to the SOS numbers.
  • Page 6: Troubleshooting

    Explanation APN,CMNET# (if no name & Password) APN Setting APN,Network name[,name,password]# APN,internet,internet,internet# (if with name & Password) If set with Domain Name: SERVER,1, SERVER,1,d.micodus.net,7700# Domain,Port# Server Setting If set with IP: SERVER,0,IP,Port# SERVER,0,47.254.77.28,7700# Restore factory settings FACTORY# Restart device RESTART#...
  • Page 7 Functions Command Format Explanation Parameter Inquiry PARAM# BATTERY: XX% (Built-in Battery Power Percent) INTERNET: CLOSED (No Network) FAILED (Connecting Network or Failure) SUCCESS (Connected to Network) NET: NONE (No GSM Signal) , HIGH / MED / LOW (Signal Strength) 18 Status Inquiry STATUS# GPS: CLOSED (GPS Module Closed) FIXED,N...
  • Page 8 Functions Command Format Explanation X=ON/OFF, default:ON; A=5~180 degrees, diversion angle degree, default:30 degrees;B=2~5 seconds, ANGLEREP,[X][,A][,B]# detecting time, default:3 seconds, Set the angle upload ANGLEREP,OFF# A=ON/OFF, On/Off mileage calculation, default: Off B=0~999999,Mileage initial value , unit:km ; default: 0, MILEAGE,[A],[B]# mileage return to zero Mileage Statistics Query current mileage MIELEAGE#...
  • Page 9 Functions Command Format Explanation Heartbeat Packet HBT,3# HBT,time# Upload NOTE: Range :1-60min, default 3min. SENLEVEL,2# NOTE: Sensitivity Level:1-9 (1-9 is from week to Sensor Sensitivity SENLEVEL,sensitivity# strong vibration) A=ON/OFF; default:ON SENALM,[A][,M]# M=0/1/2, way of alarming, 0 :GPRS only, 1: SMS+GPRS, Vibration Alarm 2: GPRS+SMS+phone call, default:1 Setting...
  • Page 10: Any Questions

    9. Any Questions? E-mail: support@micodus.com Skype: MiCODUS 10. Download the APP Search "MiCODUS" in iOS APP store or Google Play Store, or just scan the QR code as below to download MiCODUS APP: Download on the APP Store Download for...

Table of Contents