Related Manuals for MICODUS MV501G
Summary of Contents for MICODUS MV501G
- Page 1 MV501G User Manual V1.0 Learn how to set up your new MiCODUS Tracker Copyright ©2022 MiCODUS | All Rights Reserved...
-
Page 2: Main Features
Cut Wire Geo-fence Fuel Sensor Alarm Alarm Alarm OFF Alarm Alarm Camera 2.Specifications Model MV501G Weight 150g Device Information Dimensions 107mm(L) * 51mm(W) * 20mm(H) Charging Time Around 7 hours Battery Working Time Tracking Mode:1- 2 Days Working Voltage DC 9-95V... -
Page 3: Wiring Diagram
3.Wiring diagram OFF/ON Normal SIM Card Celluar Signal GNSS Signal Power... -
Page 4: Activate Device
4. Activate Device Install the SIM card via the correct direction as below: Normal SIM State Event Charging Solid POWER LED (RED) Charger inserted and battery has been fully charged Dark Charger has not been inserted Dark Flash every 1 second Searching for network CELL LED (YELLOW) -
Page 5: Package Content
5. Package Content GPS Main Unit MV501G Function Cable Microphone Cable SOS Button Cable Relay User Guide Temperature Sensor (Optional) Fuel Sensor (Optional) Camera (Optional) Genuine Packing Box... -
Page 6: Functions Explanation
6. Functions Explanation Please follow with the quick user guide carefully! a. Voice Monitor: For example: * Set center number by this sms command: MV501G CENTER,A,center number# CENTER,A,12345678910# * Switch the tracker to voice monitor mode by this sms command:... - Page 7 Enable SOS Emergency Call For example: * Set sos alarm numbers via this sms command: MV501G SOS,A,1st number,2nd number,3rd number# SOS,A,12345678910# * Long press the SOS panic button 3 seconds then SET SOS NUMBER OK the emergency call will be made to the sos numbers, it will dial the numbers by turn till it is picked up 7.
-
Page 8: Troubleshooting
APN,CMNET# (if no name & Password) APN Setting APN,Network name[,name,password]# APN,internet,internet,internet# (if with name & Password) If set with Domain Name: SERVER,1, SERVER,1,d.micodus.net,7700# Domain,Port# Server Setting If set with IP: SERVER,0,IP,Port# SERVER,0,47.254.77.28,7700# A=old password, six digitals, digital range: 0-9, Revise the instruction default：000000;... - Page 9 Functions Command Format Explanation TRAFFIC,ON# Internet Traffic Switch TRAFFIC,OFF# Version Inquiry VERSION# Parameter Inquiry PARAM# Check All Alarms Status ALARM# BATTERY: XX% (Built-in Battery Power Percent) NET: CLOSED (No Network) FAILED (Connecting Network or Failure) SUCCESS(Connected to Network), NONE (No GSM Signal) HIGH / MED / LOW (Signal Strength) GPS: CLOSED (GPS Module Closed) FIXED, Status Inquiry...
- Page 10 Functions Command Format Explanation X=ON/OFF, default：ON; A=5～180 degrees, diversion angle ANGLEREP,[X][,A][,B]# degree, default：30 degrees；B=2～5 seconds, Set The Angle Upload detecting time, default：3 seconds, ANGLEREP,OFF# A=ON/OFF, On/Off mileage calculation, default: Off MILEAGE,[A],[B]# B=0～999999，Mileage initial value , unit：km ; default: 0, mileage return to zero Mileage Statistics MIELEAGE# Query current mileage...
- Page 11 Functions Command Format Explanation Set the device out of arm mode Disarm manually DISARM# A=1/2; 1: Enable relay immediately 2: Enable relay safely [STATE] ON/OFF 1. RELAY,1# A is set to 1, the relay command will be executed RELAY,A# immediately; 2.
-
Page 12: Any Questions
10. Any Questions? E-mail: support@micodus.com Skype: MiCODUS 11. Download the APP Search "MiCODUS" in iOS APP store or Google Play Store, or just scan the QR code as below to download MiCODUS APP: Download on the APP Store Download for...
Need help?
Do you have a question about the MV501G and is the answer not in the manual?
Questions and answers