Picture Menu - InFocus Learn Big XS1 Reference Manual

PICTURE menu

Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
Preset Mode
(PC/DVI-A/DVI-D:
Brightest;
YPbPr/ S-Video/
Video: Standard)
Reference
Mode
Brightness
Contrast
Color
(0)
Tint
(0)
Sharpness
(15)
BrilliantColor™
(On)
Color
Temperature
(T3)
3D Color
Management
Save Settings
46 Operation
DESCRIPTION
Pre-defined picture modes are provided so you can optimize
your projector image set-up to suit your program type. See
"Selecting a picture mode" on page 33
Selects an picture mode that most suits your need for the image
quality and further fine-tune the image based on the selections
listed on the same page below. See
mode" on page 34
Adjusts the brightness of the image. See
on page 35 for details.
Adjusts the degree of difference between dark and light in the
image. See "Adjusting Contrast" on page 35
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 35
Adjusts the red and green color tones of the image. See
"Adjusting Tint" on page 35
Adjusts the image to make it look sharper or softer. See
"Adjusting Sharpness" on page 35
See "Adjusting BrilliantColor™" on page 36
When BrilliantColor™ is set to Off, the color temperature
adjustment will not function.
There are four color temperature settings are available. See
"Selecting a color temperature" on page 36
See "3D Color Management" on page 36
Saves the settings made for User 1 or User 2 mode.
"Setting the User 1/User 2
for details.
for details.
for details.
for details.
"Adjusting Brightness"
for details.
for details.
for details.
for details.
for details.