Adjusting The Sound; Personalizing The Projector Menu Display - InFocus Learn Big XS1 Reference Manual

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speaker.
Be sure you have made a correct connection to the projector audio input. See
"Connection" on page 13
Muting the sound
To temporarily turn off the sound,
1. Press Menu/Exit and then press
menu is highlighted.
2. Press
or remote control. The Audio Settings page displays.
3. Highlight Mute and press
Adjusting the sound level
To adjust the sound level,
1. Repeat steps 1-2 above.
2. Press

Personalizing the projector menu display

The On-Screen Display (OSD) menus can be set according to your preferences.
The following settings do not affect the projection settings, operation, or
performance.
• Menu Display Time in the SYSTEM SETUP: Advanced > Menu Settings
menu sets the length of time the OSD will remain active after your last button
press. The time length ranges from 5 to 30 seconds in 5-second increments.
Use /
• Menu Position in the SYSTEM SETUP: Advanced > Menu Settings menu
sets the OSD position in five locations. Use
• Language in the SYSTEM SETUP: Basic menu sets your familiar language for
the On-Screen (OSD) Menus. Use
• Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo
screen to be displayed during projector start-up. Use
for how the audio input is connected.
to highlight Audio Settings and press Mode/Enter on the projector
to highlight Volume and press
to select a suitable time.
/ until the SYSTEM SETUP: Advanced
/ to select On.
/ to select a desired sound level.
/
/ to select your language.
to select a preferred position.
/ to select a screen.
Operation 41