Table of Contents
Advertisement
Troubleshooting
When your sunbed or a part of it does not function, please check:
•
-
the fuses/differential switch of your main supply;
-
the connection to the main power supply and fuse;
-
the thermal switches (temperature safety);
-
the (possible) plug connections between different parts (for example in the pillar; see
STEP 5)
If one of the lamps does not function anymore, change it with the lamp next to it. If it still
•
does not work, change the starter;
•
Switch off the power supply to the machine in case of:
-
working inside the sunbed;
-
fans are out of order;
-
any doubt of the nature of the failure;
•
Please contact your technical servicer in case the problem cannot be solved with the above
mentioned possibilities.
Maintenance
After 50 hours or at least after one month and then every 500 hours or 6 months:
• Visual inspection of all parts inside the E6 PowerTower;
• Remove dust and fluffs inside;
• Check the working of the whole machine;
• Check screws and nuts (if loose tighten);
Always:
• Pay attention to strange noises in the sunbed;
• Clean the acrylics after every tanning session;
• Consult an authorised service agent in the event your Ultrasun machine has a failure;
Many parts can be recycled, so keep them separate and do
not dispose of them.
15
Advertisement
Table of Contents
