Additional Assembly Instructions E6 - ULTRASUN E6 Manual

DC: See page 12 for details
Single Phase 220V + PE
Additional Assembling Instructions E6
Please put all the parts together as is shown in the previous drawings. At first assemble the base
plate like in the drawing, may this already be pre-assembled you can skip this step. Slightly fasten all
nuts and bolts by hand. After all parts are assembled you can fasten them properly. Follow the
following steps:
STEP 1: Place the panels (B) on the bottom frame (A) by dropping the wire tacks in the similar
holes. Fix the nuts (D) with the washers (C) on top of the wire tacks.
8