Table of Contents
Advertisement
Installing The MP3/iPod/Tablet Holder* (Option)
The holder for your MP3 player, iPod or tablet should be installed as shown on the drawings: position
the holder 35 mm (1) under the edge of the box where the audio jack comes out and make sure the
holes and that the holder of the faceplate match (2). Press the rivets in the holes and put the pin in
(3). Your MP3/iPod holder is now ready for use (4).
Fig.7
Use the MP3/iPod/tablet holder
only for what it is intended.
Do not charge it with anything
heavier than 750 grams.
10
Advertisement
Table of Contents
