Table of Contents
Advertisement
6
Maintenance
6.1
Maintenance intervals
Interval
Maintenance work
Daily
Visual inspection performed by the driver
"Daily visual inspection by the driver" on page 39
At least once annu-
Performing regular fork arm inspection including accident pre-
ally*
vention inspection in accordance with ANSI/ITSDF B56.1
Ä Chapter 6.2.2 "Fork arm inspection " on page 41
Performing a check for wear in accordance with ANSI/ITSDF
B56.1
Checking the locking device
locking device" on page 42
Checking the locking bracket
locking bracket" on page 43
Checking the suspension
pension" on page 44
If necessary
Replacing the fork arm
arm" on page 45
Cleaning
6.2
Maintenance activities
6.2.1
Daily visual inspection by the driver
V1.07/2021
Ä Chapter 6.2.3 "Check for wear" on page 41
Ä Chapter 6.2.6 "Checking the sus-
Ä Chapter 6.2.8 "Replacing the fork
Ä Chapter 6.2.7 "Cleaning the fork arm" on page 45
* Depending on operating time, wear and use, the operator can choose a much shorter
interval at their own responsibility.
Personnel:
n
Protective equipment:
n
n
n
n
Folding fork armsTypes KGA, KGI, and DuoLoc
Maintenance activities > Daily visual inspection by the driver
Ä Chapter 6.2.1
Ä Chapter 6.2.4 "Checking the
Ä Chapter 6.2.5 " Checking the
Driver of carrier vehicles
Protective clothing
Industrial hard hat
Protective gloves
Safety shoes
Maintenance
Personnel
Driver of carrier vehi-
cles
Service specialist
Service specialist
Service specialist
Service specialist
Service specialist
Driver of carrier vehi-
cles
Driver of carrier vehi-
cles
39
Advertisement
Table of Contents
