Table of Contents
Advertisement
Assembly
V1.07/2021
Assemble the folding fork arms on the fork carrier in the following order:
1.
Prepare the lifting device for large loads, e.g., indoor crane and lifting straps. The
work must be carried out by 2 people.
2.
Move the fork carrier to the vertical position and move it to a height that allows for
safe and comfortable assembly of the folding fork arm.
3.
Remove the locking screw on the assembly side of the fork carrier.
Fig. 11: Opening the locking device
4.
Open the locking device of the folding fork arm. To do so, pull the lever of the
locking device vertically upwards using appropriate force (Fig. 11).
5.
Secure the folding fork arm with the lifting device (e.g., using an indoor crane
and lifting straps). Raise it to a height that allows for the fork carrier to be
enclosed by both hooks.
Folding fork armsTypes KGA, KGI, and DuoLoc
Assembly
25
Advertisement
Table of Contents
