Safety Markings - Vetter KGA Operation Manual

Safety

Safety markings

2.5 Safety markings
Type plate
Hard stamping
14
The use of the folding fork arms without the prescribed markings is considered incor-
rect use.
The type plate (specifically the article number specified there) identifies the version of
the folding fork arms upon delivery. Do not operate folding fork arms without a type
plate. The type plate is located on the side of the fork back (Fig. 7/8).
Fig. 3: Type plate
1 Article number
2 Dead weight (unit)
3 Year of manufacture
4 Center of gravity
5 Blade length
6 Load capacity x load center
7 Note "Observe load torque of fork lift truck and fork arm!" (each fork arm)
The hard stamping (specifically the article number specified there) identifies the ver-
sion of the folding fork arms upon delivery. The hard stamping is position on the side
of the fork back in all three types (
Fig. 4: Hard stamping of folding fork arms
A: Article number (optional)
t: Load capacity
l: Load center
C: Material code
M: Material
V: Manufacturer marking
Folding fork armsTypes KGA, KGI, and DuoLoc
Ä Further information on page 20/7).
V1.07/2021