Safety Markings - Vetter ManuTel SlimLine Operating Instructions Manual

Safety

Safety markings

Crushing
2.6 Safety markings
Type plate
The type plate (and the article number it contains) identifies the version of the ManuTel
SlimLine upon delivery. Do not put the ManuTel
plate. The type plate is located on the side of the fork back (Fig. 4/8).
Fig. 1: ManuTel
1 Article number
2 Series/year of construction
3 Dead weight (unit)
4 Blade length
5 Centre of gravity
6 Carrying capacity x load centre
7 Note "Pay attention to load torque of forklift and fork arm"
12
WARNING!
Risk of injury from crushing!
Due to the considerable weight of the fork blade, there is a danger of
serious injuries from limbs getting trapped during all work on the fork
blade.
– Wear protective gloves.
– Push the fork arms on and off with care and prudence.
– Secure the fork arm against falling immediately after disassembly by
putting it down.
® SlimLine type plate
®
ManuTel telescopic fork arm Type SlimLine
®
SlimLine into operation without a type
®
V1.09/2019