Operation; Manual Port Selection - IOGear MiniView G-CS102U Owner's Manual

Operation

Operation
Note: The drivers for some USB devices may need to be
un-initialized before you disconnect the device, or the sys-
tem may crash. When you switch computers with the Port
Selection Switch or Auto Scan Mode, it is the equivalent of
disconnecting the device. Therefore, if you are experienc-
ing problems when switching ports, please make sure you
un-initialize the drivers for your USB devices before switch-
ing ports or enabling Auto Scan Mode.

Manual Port Selection

Controlling the computers in your MiniView
installation couldn't be easier. Simply press the Port Selec-
TM
tion button on the MiniView 's front panel until the com-
puter you wish to access is selected.
10 10
TM
: USB