Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Strictly Beds & Bunks Cabin Bed
Summary of Contents for Strictly Beds & Bunks Cabin Bed
- Page 1 KIT P Instructions: www.strictlybeds.co.uk (Version September2020) Assembly Instructions Cabin Bed Study Desk and Chair Set IMPORTANT: DO NOT DISPOSE of the packaging until you are satisfied with your purchase. . Please keep all cardboard until fully assembled.
- Page 2 TOP TIPS - TOP TIPS Read before you start assembly Locating the Dowel Rods To keep the bed from rattling all the dowel holes have been slightly mis-drilled by a couple of mm. When you push parts together the dowels will straighten and pull together to ensure a tight fit.
- Page 3 Contents List Packing Note: DCS1 Description Required DESK Part DL - Table Leg LEFT Fixings Part DR - Table Leg RIGHT Part 1 - Top Short (410mm) Apron Part 2- Bottom Short (410mm) Apron Part 3 - Top LONG (700mm) Apron Part DT - MDF 12mm Grooved desk top CHAIR Part CBL - Chair back LEFT leg...
- Page 4 Build The Desk Desk - Build The Two Ends Place two table legs on the carpet, DL to your left and DR to your right. IMPORTANT, ensure the white markings are facing upwards and located at the top. Position Part 1 with the groove facing you at the top. Position Part 2 at the bottom of the posts.
- Page 5 Build The Chairs Lay on the carpet part CBL to the left, CBR to the right. Ensure both the white chalk markings are facing front. Now position parts 4 , 5 , and 7 as shown. Please ensure the groove on part 4 is facing upwards to the top.
Need help?
Do you have a question about the Cabin Bed and is the answer not in the manual?
Questions and answers