Citizen CMP-10 User Manual page 16

Feature
Bluetooth interface
(CMP-10BT only)
Serial interface
Input buffer
Mag stripe reader
LED color
Operation switches
Sensors and error monitoring
Power consumption
Battery
Battery charging time
Maximum lines printed with
fully charged battery
Transfer method: Bluetooth 1.2 compliant
Frequency: 2.4 GHz
Modulation method: FH method (Frequency
hopping spectrum diffusion method)
Hypothetical interference distance: 10 m
Transfer rate: 723.2k/57.6k bps (Transfer rate
between Bluetooth module only)
The communication speed between Bluetooth and
the printer is 115.2kbps.
Transfer capacity: Up to +4 dBm (Class 2 & Class 3)
Coding: 128 bit
Security level: Link
Standard PIN specification: Prepared (16 digits)
PIN code: Lower 4 digits of the BD address
Profile: Serial Port Profile
Speed: 1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200 bps
Interface: Bidirectional serial communication
Signal level: RS-232C
Data lenght: 8 bits
Start bit: 1 bit
Stop bit: 1 bit
Parity: None
Flow control: Xon/Xoff
Connector: Motorola Star Tac
64 KB
Track 1, 2, 3
Power LED: GREEN and RED
Charge LED: GREEN and RED
Power switch 1, LF switch 1
Paper end sensor, Open cover sensor,
Head temperature, Low battery
Idle - approximately 2W
When printing - approximately 15W
Battery type: Li-ion battery pack
Cell Voltage: 3.7 V
Number of cells: 2
Battery pack voltage: 7.4 V
Battery pack capacity: 2000 mAh
Approximately 3 hours by main unit + AC adapter
30,000 lines
(At temperature 20°C, standard setting,
alphanumeric slide pattern printing. The number of
lines may be changed by such condition as
temperature, etc.)
— 14 —
Parameters