Humzor NEXZDAS PRO Manual page 43

2. On the Feedback interface, click the
model and function module selection interface.
3. Click to select, double-click to deselect, you can click the
bar to select all or cancel all.
4. After selecting the vehicle or function for which you need feedback, click the
bottom right to successfully return to the Feedback interface.
5. Enter the content you need to feedback in the Complaint Content column.
6. Click the icon button to upload your screenshot.
7. Click the  button at the bottom, if your "Vehicle Name" and "Complaint Content" column input format
are correct, then feedback succeeds
www.obdii365.com
Figure 13-1 Sample Feedback Interface
icon on the right, and the system will guide you to the
Figure 13-2 Sample Vehicle Interface
icon button on the left of the bottom tab
icon button at the
43