Humzor NEXZDAS PRO Manual page 28

Figure 6-13 Sample Read DTCs Screen
 Freeze Frame – icon displays when freeze frame data is available for viewing; Tap icon to display data screen.
The Freeze Frame interface is similar to that of the Read DTCs interface and share similar operations.
 Search – tap to search the selected DTC for additional information on the Internet.
 Clear DTCs – tap to erase codes from the ECU. It is recommended that DTCs are read and needed repairs are
performed before erasing codes.
 Read DTCs - retrieves and displays the DTCs from the vehicle control system. The Read Codes screen varies
for each vehicle being tested.
6.3.6.2 Erase Codes
After reading the retrieved codes from the vehicle and certain repairs have been made, you can erase the
codes from the vehicle using this function. Before performing this function, make sure the vehicle's ignition
key is in the ON (RUN) position with the engine off.
Figure 6-14 Sample Clear DTCs Screen 1
 To erase codes
1. Tap Clear Codes in the Function Menu.
28
www.obdii365.com