Humzor NEXZDAS PRO Manual
  1. Manuals
  2. Brands
  3. Humzor Manuals
  4. Diagnostic Equipment
  5. NEXZDAS PRO
  6. Manual

Humzor NEXZDAS PRO Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Trademarks
HUMZOR®, NEXZDAS®, NEXZLINK®, and NEXZSCAN® are trademarks of Shenzhen Hanzhi
Technology Co., Ltd., registered in China, the United States and other countries. All other marks are
trademarks or registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by
any means, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission
of HUMZOR.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on the latest information
available at the time of printing.
HUMZOR reserves the right to make changes at any time without notice. While information of this
manual has been carefully checked for accuracy, no guarantee is given for the completeness and correctness of
the contents, including but not limited to the product specifications, functions, and illustrations.
HUMZOR will not be liable for any direct, special, incidental, indirect damages or any economic
consequential damages (including lost profits).
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully, paying extra attention to the
safety warnings and precautions.
For Services and Support
www.humzor.com
www.humzor.cn
service@humzor.com
info@humzor.com
For details, please refer to the
Safety Information
For your own safety and the safety of others, and to prevent damage to the device and vehicles upon
which it is used, it is important that the safety instructions presented throughout this manual be read and
understood by all persons operating or coming into contact with the device.
There are various procedures, techniques, tools, and parts for servicing vehicles, as well as in the skill of
the person doing the work. Because of the vast number of test applications and variations in the products that
can be tested with this equipment, we cannot possibly anticipate or provide advice or safety messages to cover
www.obdii365.com
NEXZDAS PRO Manual
Service Procedures
in this manual.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NEXZDAS PRO and is the answer not in the manual?

Questions and answers

Related Manuals for Humzor NEXZDAS PRO

Summary of Contents for Humzor NEXZDAS PRO

  • Page 1 All information, specifications and illustrations in this manual are based on the latest information available at the time of printing. HUMZOR reserves the right to make changes at any time without notice. While information of this manual has been carefully checked for accuracy, no guarantee is given for the completeness and correctness of the contents, including but not limited to the product specifications, functions, and illustrations.
  • Page 2 every circumstance. It is the automotive technician's responsibility to be knowledgeable of the system being tested. It is crucial to use proper service methods and test procedures. It is essential to perform tests in an appropriate and acceptable manner that does not endanger your safety, the safety of others in the work area, the device being used, or the vehicle being tested.

  • Page 3: Table Of Contents

    CONTENTS USING THIS MANUAL ......................5 ............................. 5 1.1 C ONVENTIONS GENERAL INTRODUCTION ....................6 ..............................6 2.1 T ABLET ............. 9 2.2 VCCI – V EHICLE OMMUNICATION AND HECK NTERFACE ........................9 2.3 S OFTWARE VERVIEW GETTING STARTED ......................10 ............................
  • Page 4 FEEDBACK ........................42 SETTINGS .......................... 44 ..........................44 14.1 S YSTEM .............................. 44 14.2 U NITS ..........................44 14.3 S EARCH NGINE ............................45 14.4 R ............................45 14.5 L ANGUAGE OTHER ..........................46 ..........................46 15.1 D LAYBACK ..........................46 15.2 D ANAGE NAVIGATION BAR ......................

  • Page 5: Using This Manual

    1 Using This Manual This manual contains device usage instructions. Some illustrations shown in this manual may contain modules and optional equipment that are not included in your system. 1.1 Conventions The following conventions are used. 1.1.1 Bold Text Bold text is used to highlight selectable items such as buttons and menu options. Example: ...

  • Page 6: General Introduction

    2 General Introduction The NEXZDAS PRO ND366 is a multi-platform diagnostic solution comprised of a powerful 10.1 inch TFT-LCD touchscreen Android-based tablet, a NEXZBOX communication and diagnostic measurement unit and an on-tool and cloud-based repair instructions and expert advice. As an intelligent diagnostic and information system, NEXZDAS PRO ND366 not only displays the relevant repairs gathered from experienced industry experts, but provides step-by-step guidance to ensure the repair is done correctly and efficiently.
  • Page 7 Figure 2-2 NEXZDAS Table Back View 4. Back Camera 5. Type-C charging port 6. DC Power supply input port 7. Volume button for up and down 8. Reset button for restart tablet 9. Power button 10. Collapsible Stand- extends from the back to allow hands-free viewing of the tablet Figure 2-3 NEXZDAS Collapsible Stand View www.obdii365.com...
  • Page 8 2.1.2 Power Source The tablet can receive power from any of the following sources:  Internal Battery Pack  AC/DC Power Supply IMPORTANT Do not charge the battery when the temperature is lower than 0°C (32°F) or higher than 45°C (113°F). Internal Battery Pack The tablet can be powered with the internal rechargeable battery, which if fully charged can provide sufficient power for about 8 hours of continuous operation.

  • Page 9: Vcci - Vehicle Communication And Check Interface

    SAE-J1850 PWM (Ford SCP), SAE-J1850 VPW (GM Class2) 2.2 VCCI – Vehicle Communication and Check Interface 2.2.1 Functional Description Figure 2-4 HUMZOR VCCI Top View 2.3 Software Overview 2.3.1 Overview NEXZDAS is a tool-based APP which focus on car diagnosis, reset, key programming and other maintenance functions.

  • Page 10: Getting Started

    owner or maintenance worker can learn the basic information and the existed faults of the vehicle in real time through the APP, etc., making vehicle maintenance become more convenient. 2.3.2 Features ① Wide coverage of gasoline vehicle brands of Asia, Europe and America, free download. ②...
  • Page 11 Figure 3-1 Application Menu Diagnose and application functions selection. Application Buttons - Locator and Navigation Buttons – Quickly boot to diagnose function or return android system home. Status Icons - Display system and communication signals. NOTE It is recommended to lock the screen when not in use to protect information in the system and conserve the power.

  • Page 12: Power Down

    Settings Accesses the system settings menu and general tablet menu. Remote Configures your unit to receive remote support using the TeamViewer application. Feedback Collect the customer requirement or question to engineer team. Accesses valuable application Data Management, data Others playback and so on. 3.1.2 Locator and Navigation Buttons Operations of the Navigation buttons at the bottom of the screen are described in the table below: Table 3-2 Locator and Navigation buttons...

  • Page 13: Software Installation And Running

    Forcing a shut down while the tablet is communicating with the vehicle may lead to ECU errors on some vehicles. Please exit the Diagnostics application before shutting off the tablet.  To power down the NEXZDAS tablet 1. Long press (press and hold) the Lock/Power Button. 2.

  • Page 14: Product Registration And Login

    5 Product Registration and Login 5.1 User Registration When you access the "NEXZDAS" application for the first time, you need to follow the steps below to register: 1. Click the "NEXZDAS" icon on the desktop to open the application. 2. On the Login interface, click the "Register" button to enter the registration interface. 3.

  • Page 15: Login

    Figure 5-2 Sample Registration Interface 5.2 Login Users who have registered can log in through the following steps: 1. Click the "NEXZDAS" icon on the desktop to open the application. 2. On the Login registration interface, enter the email or mobile number you need to log in in the "E-mail" column.
  • Page 16 Figure 5-3 Sample Password Reset Interface 5.2.2 Serial Number Binding After the user logs in successfully, it comes to the serial number binding interface. Users can add, delete, and select products here. Figure 5-4 Sample Binding Serial Number Interface 5.2.3 Product Binding 1.
  • Page 17 5.2.5 Product Selection 1. Click the product serial number you need to enter, and the icon on the right becomes 2. Click the "Next step" button and the system will guide you to the main interface of "HUMZOR". 5.2.6 Enable Location Permission IMPORTANT Android 6.0 or above, the tablet need to get tablet address information.
  • Page 18 Figure 5-7 Sample Location Icon-1 2. Click the icon on the right side of the top navigation bar. In the pop-up location permission prompt box, click the "OK" button. Figure 5-8 Sample Location Permission Prompt Box Location Use location 3. In " "...
  • Page 19 5. After setting, click the return button at the top to return to the main app interface, and the icon disappears. 6. On the main interface of "HUMZOR", if there is an icon on the top navigation bar , it indicates that NEXZDAS positioning is not turned on.

  • Page 20: Bluetooth Connection

    VCI device with the corresponding serial number you have purchased through the following steps: 1. Insert the VCI of the HUMZOR NEXZDAS product you purchased tightly into the OBD port. At this time, the Bluetooth icon on the top right side is.

  • Page 21: Protocol Supported

    3. When the above steps are completed, check the VCCI navigation button at the bottom bar on the screen. If a blue BT, Wi-Fi or USB icon displays at the lower right corner, the NEXZDAS PRO Diagnostic Platform is ready to start vehicle diagnosis.
  • Page 22 Figure 6-1 Sample Vehicle Menu Screen Manufacturer Buttons The Manufacturer buttons display the various vehicle brand names. Select the manufacturer button after the VCCI device is properly connected to the test vehicle to start a diagnostic session. Select EUROPE->BMW brand to check. Figure 6-2 Sample BMW brand www.obdii365.com...
  • Page 23 6.3.2 Vehicle Identification The NEXDAS diagnostic system supports two methods of Vehicle Identification. 1. Vehicle Manual Select 2. Vehicle Select by VIN Figure 6-3 Sample Diagnostic Menu Selection 6. 3.2.1 Vehicle Manual Select For vehicles that do not support the Auto VIN diagnose function, the NEXZDAS diagnostic system allows you to enter the vehicle brand manually.
  • Page 24 systems for fault codes. Click on BMW and the system will acquire VIN information automatically or allow users to input the VIN manually.  To perform Manual Input 1. Tap the Diagnostics application button from the Menu. The Vehicle Menu displays. 2.
  • Page 25 Figure 6-6 Sample Communication scream Figure 6-7 Sample System Test mode 6.3.3 Quick Test The Quick Test function performs a comprehensive scanning of all the systems in the vehicle ECU to locate faults and retrieve DTCs. Tap Fault to start. Systems with no faults detected will display in blue; systems containing faults will display red.
  • Page 26 Figure 6-9 Sample Quick Test Result Screen 6.3.4 Control Unit This option allows you to manually locate a required control system for testing through a series of choices. Simply follow the menu driven procedure, and make proper selection each time; the program will guide you to the diagnostic function menu after a few choices you've made.
  • Page 27 configurations, and allows entry of adaptive values for certain component after repairs. Depending on the test vehicle, this selection may sometimes appear. 6.3.5 ECU Information This function retrieves and displays the specific information for the tested control unit, including unit type and version numbers.
  • Page 28 Figure 6-13 Sample Read DTCs Screen  Freeze Frame – icon displays when freeze frame data is available for viewing; Tap icon to display data screen. The Freeze Frame interface is similar to that of the Read DTCs interface and share similar operations. ...
  • Page 29 2. A warning message displays to inform you of data loss when this function is applied. Tap YES to continue. A confirming screen displays when the operation is successfully done. Tap NO to exit. 3. Tap ESC on the confirming screen to exit Erase Codes. 4.

  • Page 30: Special Function

    6.3.8 Active Test The Active Test function is used to access vehicle-specific subsystem and component tests. Available tests vary by vehicle. During an active test, the tablet sends commands to the ECU to activate the actuators. This test determines the integrity of the system or part by reading ECU data, or by monitoring the operation of the actuators.
  • Page 31 Figure 7-1 Sample Special Function Screen 1 For example: Click on Special Function->BATTERY->Europe->BMW, interface as image such as： Figure 7-2 Sample Special Function Screen 2 Figure 7-3 Sample Special Function Screen 3 www.obdii365.com...
  • Page 32 Figure 7-4 Sample Special Function Screen 4 Figure 7-5 Sample Special Function Screen 5 Figure 7-6 Sample Special Function Screen 6 www.obdii365.com...

  • Page 33: Key Programming

    Figure 7-7 Sample Special Function Screen 7 Key Programming These functions perform various key programmer, including add and erase keys, reset immobilizer, replace engine or immobilizer ECU, and so on. For example： Click on Key Programming ->ASIA->HYUNDAI->Agree->Calculator->Security code calculator. Figure 8-1 Sample Key Programmer Screen 1 www.obdii365.com...

  • Page 34: App Store

    Figure 8-2 Sample Key Programmer Screen 2 Figure 8-3 Sample Key Programmer Screen 3 Figure 8-4 Sample Key Programmer Screen 4 App Store You can download the model or function you need through the following steps: www.obdii365.com...

  • Page 35: Vehicle Das Download

    On the "HUMZOR" main interface, click the "App Store" icon button, and the system will guide you to the "App Store" interface. If the "basic data" of your NEXZDAS application is not the latest, please click the "OK" button and the system will guide you to download the latest "basic data".

  • Page 36: Special Function Download

    4. Click the icon button at the bottom right to start the download function. 5. After the special function is downloaded and decompressed, you can click the "Special Function" icon button on the "HUMZOR" main interface to enable the special function. www.obdii365.com...

  • Page 37: Key Programming Download

    5. After the models have been downloaded and decompressed, you can click the "Key Programming" icon button on the "HUMZOR" main interface to start IMMO function. Figure 9-6 Sample IMMO Function Interface...

  • Page 38: Dtc Query

    ID. Figure 10-1 Sample DTC Query Interface 11 VIN Query You can check the VIN through the following steps: 1. On the "HUMZOR" main interface, click the "VIN Query" icon button, and the system will guide you to www.obdii365.com...

  • Page 39: Personal

    VIN you have inquired. Figure 11-1 Sample VIN Query Interface 12 Personal On the "HUMZOR" main interface, click the "Personal" icon button, and the system will guide you to the Personal interface. 12.1 Editing Personal Information If you need to add or modify some personal information, you can operate it through the following steps: 1.

  • Page 40: Upgrade

    Figure 12-1 Sample Editing Personal Information Interface 1 Figure 12-2 Sample Editing Personal Information Interface 2 12.2 Upgrade If your NEXZDAS application is not the latest version, you can upgrade the application version through the following steps: 1. On the Personal interface, click the "Upgrade" icon button. 2.
  • Page 41 Figure 12-3 Sample Upgrade Interface 1 3. The version is downloaded successfully, click the "INSTALL" button to start the installation. Figure 12-4 Sample Upgrade Interface 2 4. After installation, click the "OPEN" button, then the upgrade completes successfully. Figure 12-5 Sample Upgrade Interface 3 www.obdii365.com...

  • Page 42: Product Serial Number Switch

    If you need to feedback some problems when using the NEXZDAS application, you can use the following steps to feedback: 1. On the "HUMZOR" main interface, click the "Feedback" icon button, and the system will guide you to the feedback interface.
  • Page 43 Figure 13-1 Sample Feedback Interface 2. On the Feedback interface, click the icon on the right, and the system will guide you to the model and function module selection interface. Figure 13-2 Sample Vehicle Interface 3. Click to select, double-click to deselect, you can click the icon button on the left of the bottom tab bar to select all or cancel all.

  • Page 44: Settings

    14 Settings On the "HUMZOR" main interface, click the "Settings" icon button, and the system will guide you to the Settings interface. 14.1 System Info Figure 14-1 Sample System Info Interface 14.2 Units In the Settings interface, click the "Units" button to switch the units.

  • Page 45: Run Mode

    Figure 14-3 Sample Search Engine Interface 14.4 Run Mode In the Settings interface, click the "Run Mode" button to switch between modes. Figure 14-4 Sample Run Mode Interface 14.5 Language You can switch the display language through the following steps: 1.

  • Page 46: Other

    Figure 14-5 Sample Language Interface 15 Other On the "HUMZOR" main interface, click the "Other" icon button, and the system will guide you to the other interface. Figure 15-1 Sample Other Interface 15.1 Data Playback Data stream playback function. 15.2 Data Manage You can manage the downloaded models, functions, screen recordings, screenshots, etc.
  • Page 47 2. If you need to manage the pictures captured in the NEXZDAS application, click the "Images" button on the left. Click the picture to zoom in and view the picture in full screen; click the selection box at the bottom right corner of the picture, or click the icon button at the bottom left to select single or multiple pictures.

  • Page 48: Navigation Bar

    16.1 Record Video When you use the NEXZDAS application, you can do the following steps to record video: 1. On the main interface of "HUMZOR", click the icon on the right side of the top navigation bar. 2. Click the "START NOW" button on the left of the pop-up prompt box.

  • Page 49: Screenshot

    When you use the NEXZDAS application, you can save a screenshot of the current interface through the following steps: On the main interface of "HUMZOR", click the icon on the right side of the top navigation bar, the screenshot is saved successful, and you can view it on the "Data Manage" interface.

This manual is also suitable for:

Sp353

Table of Contents