Control Panel - Firman P01001 Owner's Manual

Control Panel

1
NOTE:
Total power drawn from all receptacles must not exceed the name plate rating.
1
Engine Switch – Flip the switch to the "ON"(l)
position and pull the recoil starter to start
the generator. Turn to the "OFF"(O) position
to turn off the generator.
2
3
120V, 20A Outlet – (NEMA 5-20R) 20 Amp
of current may be drawn from this 120 Volt
receptacle.
4
Voltmeter – Shows the output voltage.
2
3
8
4
5
12V DC outlet – 8.3 Amp of DC current
may be drawn from the receptacle.
Use this outlet to charge 12V automotive
type batteries ONLY. See 12VDC outlet
(Battery Charger) section.
6
DC Circuit Breaker – Protect the 12V DC outlet.
7
Ground Terminal – Consult an electrician
for local grounding regulations.
8
Outlet Cover - Protect the receptacles from
dust and debris.
6
5
7