Table of Contents
Advertisement
!1
B
-
SECURE TO THE CABINETRY ON THE SIDES
For further adjustment,
using the most appropriate
length Hexagonal socket
supplied, fully extend
leveling feet up to required
distance by hand.
Hexagonal
x4
socket
2
Before refitting the
drawer, ensure the hoses
are not twisted and the
latches at the rear of
each drawer runner are
facing forward.
Secure using two pairs
of formed brackets
(use 5⁄8" (16 mm)
screws). Repeat on
the other side of the
chassis.
Ensure product is level and
aligning with cabinetry.
!3
B
-
REFIT THE DRAWER ONTO THE RUNNERS
1
!2
B
-
OPTIONALLY SECURE TO THE CABINETRY ABOVE
Lift or rotate counter-clockwise the
drawer back onto the drawer runners
on either side.
3
Release tab
The top mounting
brackets will only
bend upwards a
(x2)
maximum of 3/8"
(10 mm).
4
Pull the release tabs forward on both
sides 4" (100 mm). Ensure the tabs are
fully pulled forward and click into place.
12
Advertisement
Table of Contents
